Jaber Eid Abu Qudeiri

Bio: 
My name is Jaber Abu Qudeiri. I have obtained my BSc. degree in Mechanical Engineering from the University of Jordan, Jordan in 1992 and my Master and PhD in Manufacturing Engineering from Gifu University, Japan in 2005 and 2008, respectively. I worked as assistant professor at Philadelphia University in Jordan from Sept. 2008 to Aug. 2010. I was also employed at King Abdulaziz University then worked as assistant professor from Sept. 2010 to Aug. 2012. In Sept. 2012, I joined the Advanced Manufacturing Institute (AMI), King Saud University as assistant professor. I have more than 7 years of teaching and research experience. My area of interest includes Modeling and Optimization of Manufacturing Systems, Optimization of Sequence of Operations in CNC, Predict Springback in Sheet Metal Bending Process. I published several papers in international journals and presented many paper in different conferences.

Curriculum Vitae Name: Jaber Eid Abu Qudeiri 545246213 – +966 Mobile King Saud University, Riyadh–Saudi Arabia Dr.qudeiri@gmail.com, Dr.qudeiri@hotmail.com Homepage: http://www.wix.com/qudeiri/dr-jaber Personal Data : Name Jaber Eid Abu Qudeiri Nationality Jordanian Date of Birth March 3, l969 Education: • Ph.D in Mechanical Engineering/ Manufacturing, Gifu University, Japan. 3/2008 PhD thesis title: Concurrent Production Engineering System for Buffer Size and Layout Design of Flexible Production Systems • M. Sc. in Mechanical and System Engineering, Gifu University, Japan. 3/2005. • B.Sc in Mechanical Engineering. University of Jordan, Jordan, 7/1992. Experiences: • 9/2012 – Present: Assistant Professor, King Saud University, Advanced Manufacturing Institute. • 8/2011 – 9/2012: Assistant Professor and Head of the Industrial Engineering Department, King Abdulaziz University, faculty of Engineering in Rabigh, Industrial Engineering Department. • 9/2010 – 8/2011: Assistant Professor, King Abdulaziz University, faculty of Engineering in Rabigh, Industrial Engineering Department. The work includes the following: ♦ Teaching the following: - Introduction to Engineering design course. - Probability and Engineering Statistics ♦ Preparing a CIM lab in the Industrial Engineering Department • 9/2008 – 8/2010: Assistant Professor, Philadelphia University, Mechanical Engineering Department. Teaching the following: ♦ Manufacturing Processes. ♦ Computer Aided Design \ Computer aided Manufacturing (CAD\CAM) ♦ Engineering Material and Manufacturing Technology. ♦ Reverse Engineering ♦ Computer Aided Drafting ♦ Workshop I, Workshop II • 4/2002 – 3/2003: Research Student in Modern Manufacturing Systems Lab., Mechanical and System Engineering Department, Gifu University, Gifu, Japan. • 3/1999 – 3/2002: Training Officer in CNC machine tools workshop and Machinery workshop, Specialized Training Institute, Vocational Training Corporation, Amman, Jordan. • 9\1994 – 3/1999: Lab. Supervisor in Department of Mechanical and Industrial Engineering, Applied Science University, Amman, Jordan. Supervisor of the following Lab. ♦ Computer Aided Design Lab. ♦ Automatic Control Lab. ♦ Strength of Materials Lab. Research Interests: The research interests are summarized in the following themes: ♦ Production system optimization and simulation, ♦ Artificial intelligence in manufacturing systems, ♦ CAD/CAM, ♦ Production systems layout design, ♦ Concurrent Production Engineering System, ♦ CNC machine tools and their tool path optimization, Courses Handled ♦ Intelligent Production Systems. ♦ Manufacturing Devices Engineering. ♦ Machine Kinematics and Control Engineering. ♦ System and Control Theory. ♦ Advanced Finite Element Methods in Mechanical Engineering. ♦ Dynamics and Control of Electromechanical Systems ♦ Advanced System Design Technology. ♦ Surface Manufacturing Engineering. ♦ Advanced Theory of Strength of Materials ♦ Advanced Mathematics for System Engineering. ♦ Complex-System Control Theory. Guest Lectures Delivered ♦ Delivered a lecture as supervisor assistant on “Think Design” in Faculty of Engineering, Gifu University organized by Mechanical and System Engineering Department, Gifu, Japan, October 2002- March,2003. ♦ Delivered a lecture on “CNC Machine Tool Programming and Operating” in the Specialized Training Institute sponsored by Japan International Cooperation Agency (JICA) and organized by Vocational Training Corporation, Amman, Jordan 3th -28th March, 2002. ♦ Delivered a training course on “Computer Aided Design (AutoCAD)” in the Specialized Training Institute organized by Vocational Training Corporation, Amman, Jordan 14th May-13th June, 2000. ♦ Delivered many lectures on “Automatic Control Systems and Computer Aided Design” in the Applied Science University organized by Mechanical and Industrial Engineering department, Amman, Jordan, September 1994 -March, 1999. Workshop/Training Programs Attended ♦ Participated in a Technical Training Course in the field of CNC Machine Tools organized by the Japan International Cooperation Agency (JICA) held at Polytechnic Center Chiba, Tokyo, Japan, from May 30th 2000 to September 28th 2000. ♦ Two weeks professional training on Leveling, Feed system, ATC and Electrical circuit of Machining center and Leveling, Turret and Electrical circuit of Lathe machine as certificate Mori Seiki senior Technician, Mori Seiki Factory, Nara, Japan, September 2000. ♦ Participated in a technical training course for operating and programming and maintenance of NC Electrical Discharge Machine, held at Makino Milling Machine Co., LTD., Tokyo Japan, September 2000. ♦ Attended the upgrading training course in EDM Programming and Operating organized by Japan International Cooperation Agency (JICA) and held at Specialized Training Institute for Metal Industries, Amman, Jordan, 11th -15th February, 2001. ♦ Attended a course entitled Computer Aided Design and Manufacturing organized by Jordan Engineers Association and held at University of Jordan, Amman, Jordan, 9th -27th March, 1996. ♦ Joined a training course in Electrical Control in Hydraulic Systems organized by Vocational Training Corporation and held at Yajooz Trade Training centre, Amman, Jordan, 6th -18th February, 1993. Awards & Merits: 1. Letter’s Patent with name of Isolated Plastic Protector of Water Counter, Registered at Ministry of Industrial and Tried under No. P/1775, 1993 Fellowships • April 2005 - March 2008 Ministry of Education, Culture, Sports, Science and Technology (Monbukagakusho), Japan. For Doctor Course at The Department of Mechanical and System Engineering, Faculty of Engineering, Gifu University, Gifu, Japan. • April 2003 – March 2005 Ministry of Education, Culture, Sports, Science and Technology (Monbukagakusho), Japan. For Master Course at The Department of Mechanical and System Engineering, Faculty of Engineering, Gifu University, Gifu, Japan. • April 2002 – March 2003 Ministry of Education, Culture, Sports, Science and Technology (Monbukagakusho), Japan. For Research Student in Gifu University, Gifu, Japan. Publications : (A) Publications in Refereed Journals (1) Jaber Abu Qudeiri, Fayiz Abu Khadra, Abdulrahman Al-Ahmari, Usama Umar, Effect of Material and Geometrical Parameters on the Springback of Metallic Sheets, Life Sci J, 10(2):1531-1536, 2013. (2) Fayiz Y. Abu Khadra, Jaber E. Abu Qudeiri. Development an Integrated Framework for Springback Prediction in Bending, Life Sci J 10(2):1654-1659, 2013. (3) Fayiz Y. Abu Khadra; Jaber E. Abu Qudeiri, Comparison between neural network and response surface metamodels based on D-optimal designs, International Journal of Computational Materials Science and Surface Engineering (IJCMSSE), Vol. 5, No. 2, 2013. (4) Khalid R. Al-Momani, Jaber E. Abu Qudeiri. Modelling of parallel production system with rework paths and its GA based simulator for optimal design, International Journal of Manufacturing Technology and Management, Vol. 23, No.1/2 pp. 69 – 81, 2011. (5) Saleh A, Qudeiri JA, Al-Nimr MA. Performance investigation of a salt gradient solar pond coupled with desalination facility near the Dead Sea. The Energy. 2011;36:922-31. (6) Yamamoto Hidehiko, Abu Qudeiri Jaber. A Concurrent Engineering System to Integrate Production Simulation and CAD System for FTL Layout Design, Int. J. of Product Development. Vol. 10, No.1/2/3 PP. 101 – 122, 2010. (7) Jaber Abu Qudeiri, Hidehiko Yamamoto, Rizauddin Ramli. Buffer size decision for Flexible Transfer Line with Rework Paths using Genetic Algorithm, International Journal of Intelligent Systems Technologies and Applications. Vol. 7, No.2 pp. 227 – 240, 2009. (8) Rizauddin Ramli, Hidehiko Yamamoto, Jaber Abu Qudeiri. Hypothetical reasoning approach for Automated Guided Vehicle action decision in Autonomous Decentralised Flexible Manufacturing Systems, International Journal of Intelligent Systems Technologies and Applications. Vol. 7, No.2 pp. 171 – 187, 2009. (9) Jaber Abu Qudeiri, Hidehiko Yamamoto and Rizauddin Ramli, FTL with feed-forward optimal design by discrete event production simulator with GA. International Journal of Adaptive Infrastructures (IJAIS). Vol. 1, No.1, pp. 60-76, 2009. (10) Rizauddin Ramli, Jaber Abu Qudeiri, and Hidehiko Yamamoto, Tool Path of Lathe Machine in Flexible Transfer Line by Using Genetic Algorithm, International Journal of Production Economics, Elsevier. Elsevier. Volume 121, No. 1, PP.: 72-80, 2009. (11) Rizauddin Ramli, Hidehiko Yamamoto, Abu Bakar Sulong, Dzuraidah Abdul Wahab and Jaber Abu Qudeiri, Real-time AGV Action Decision in AD-FMS by Hypothetical Reasoning, European Journal of Scientific Research Vol 25 Issue 2. Vol.25 No.2, PP.310-324, 2009. (12) Khalid R. Al-Momani and Jaber E.Abu Qudeiri, “Definition of Flexible Transfer Line with Rework Paths and Its Simulator for Optimal Production Design”. IJCSNS International Journal of Computer Science and Network Security. VOL.9 No.1, PP.: 331-338, January 2009. (13) Hidehiko Yamamoto, Jaber E. Abu Qudeiri and Mohamed Jamali, Concurrent Production Engineering System for Buffer Size Decision and FTL Layout Design, Journal of System Science and System Engineering, Springer, Volume 17, Number 2, pp. 187-203, June 2008 (14) Yamamoto, H., Abu Qudeiri, J. and Marui, E., “Definition of FTL with bypass lines and its simulator for buffer size decision”, International Journal of Production Economics, Elsevier, Volume 118, No. 1, PP.: 18-25, 2008. (15) Abu Qudeiri Jaber, Yamamoto Hidehiko, Rizauddin Ramli and Mohammed Jamali. Genetic Algorithms for Buffer Size and Work Stations Capacity in Serial-Parallel Production Lines. Artificial Life and Robotics (International Journal), Springer, Vol. 12, No. 1-2, PP. 102-106, 2008. (16) Abu Qudeiri Jaber, Yamamoto Hidehiko and Rizauddin Ramli. Machine Learning in Production Systems Design Using Genetic Algorithms. International Journal of Computational Intelligence, ISSN 1304-2386, Volume 4, No. 1, PP.: 72-79, 2008 (17) H. Yamamoto, J. Abu Qudeiri, T. Yamada and R. Rizauddin. Production layout design system by GA with one by one encoding method. Artificial Life and Robotics (International Journal), Springer, Volume 13, Number 1, PP.: 234-237, 2008. (18) Jaber Abu Qudeiri, Hidehiko Yamamoto and Rizauddin Bin Ramli, Model of Flexible Production Systems with Sub-Lines and Their GA Expressions. International Journal of Computer Science and Network Security, Vol.7, No.4, PP.:223-231, 2007. (19) Jaber Abu Qudeiri, Hidehiko Yamamoto and Rizauddin Ramli, Optimization of Operations Sequence in CNC Machine Tools Using Genetic Algorithms. Journal of Advanced Mechanical Design, Systems, and Manufacturing, Volume 1, No. 2, PP.: 272-282, 2007. (20) Jaber Abu Qudeiri and Hidehiko Yamamoto, Optimization of FTL Layout Design Through Asymmetrical and Restricted Plant Using GA, Journal of solid mechanics and material Engineering, Vol. 1. No. 1 PP.: 81-92, 2007. (21) Rizauddin Ramli, Hidehiko Yamamoto and Jaber Abu Qudeiri, Real Time Part Input Control of a Pull Production System by Finding IF-THEN Rules, Journal of Advanced Mechanical Design, Systems, and Manufacturing, (Special Issue on Advance Production Scheduling) ,Volume 1, No.2, PP. : 227-237, 2007. (22) Rizauddin Bin Ramli, Jaber Abu Qudeiri and Hidehiko Yamamoto, Anticipating Action Decisions of Automated Guided Vehicle in an Autonomous Decentralized Flexible Manufacturing System, International Journal of Intelligent Technology, ISSN 1305-6417,Volume 2, Number 1, PP.: 21-27, 2007. (23) Jaber ABU QUDEIRI, Hidehiko YAMAMOTO, Rizauddin RAMLI and Khalid R. Al-MOMANI. Development of Production Simulator for Buffer Size Decisions in Complex Production Systems Using Genetic Algorithm. Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 1, No. 3, PP.:418-429, 2007. (B) Publications in Refereed Conferences (24) J. Abu Qudeiri, Khalid Momani, Fayiz Abu khadra, Osama Ghazal, Anouar Jamali and Rizauddin Ramli, Modeling of Complex production Systems and its simulator for Optimal Design. International Conference on Industrial Engineering and Systems Management, Montreal, Canada, may13 – 15, 2009. (25) Rizauddin Ramli, Hidehiko Yamamoto, Jaber Abu Qudeiri, Analogy Process in Real-time Control of Parts Input for Flexible Production System. International Conference on Industrial Engineering and Systems Management, Montreal, Canada, may13 – 15, 2009. (26) J. Abu Qudeiri, H. Yamamoto and R. Rizauddin, Production Layout Design System by GA with One by One Encoding Method. Proceeding of the thirteen International Symposium on Artificial Life and Robotics 2008 (AROB 13th '08), B-Con Plaza, Beppu, Oita, JAPAN, PP. 316 – 319, January 31 – February 2, 2008. (27) Jaber Abu Qudeiri, Hidehiko Yamamoto and Mohamed Jamali, Development of New Production Simulator for Complex Production Systems Design, Proceedings of the 37th International Conference On Computers and Industrial Engineering, PP.: 2433 – 2443, Alexandria – Egypt, October 2007. (28) Jaber Abu Qudeiri, Rizauddin Ramli and Hidehiko Yamamoto, FTL Layout Design Optimization in an Asymmetrical and Restricted Plant Using Q-learning, International Conference of Industrial Engineering and System Management (IESM 07), Beijing, China, May 30 - June 2, 2007. (29) Jaber Abu Qudeiri, Rizauddin Ramli and Hidehiko Yamamoto, Deciding Buffer Size in a Complex Production System Using a GA - Production Simulation Based Method, International Conference of Industrial Engineering and System Management (IESM 07), Beijing, China, May 30 - June 2, 2007. (30) Rizauddin Ramli, Jaber Abu Qudeiri, and Hidehiko Yamamoto, Future Anticipative Reasoning of Automated Guided Vehicle Decisions in Autonomous Decentralized Flexible Manufacturing System, International Conference of Industrial Engineering and System Management (IESM 07), Beijing, China, May 30 - June 2, 2007. (31) Rizauddin Ramli, Jaber Abu Qudeiri, and Hidehiko Yamamoto, Tool Path of Lathe Machine in Flexible Transfer Line by Using Genetic Algorithm, International Conference of Industrial Engineering and System Management (IESM 07), Beijing, China, May 30 - June 2, 2007. (32) Abu Qudeiri Jaber, Rizauddin Ramli and Hidehiko Yamamoto, Selecting Machines and Buffer Size in Complex Production System Using Genetic Algorithms. Proceeding of the 5th International Symposium on Management of Technology (ISMOT'07), PP. 1134 – 1138, Hangzhou, China, June 1-3, 2007. (33) Rizauddin Ramli, Jaber Abu Qudeiri, and Hidehiko Yamamoto, Planning Framework for Autonomous Decentralized Flexible Manufacturing System, Proceeding of the 5th International Symposium on Management of Technology (ISMOT'07), PP. 381 – 385, Hangzhou, China, June 1-3, 2007. (34) Abu Qudeiri Jaber, Rizauddin Ramli and Yamamoto Hidehiko, Genetic Algorithms for Buffer Size and Work Stations Capacity in Serial-Parallel Production Lines. Proceeding of the twelve International Symposium on Artificial Life and Robotics (AROB 12th '07), PP. 513 - 516 B-Con Plaza, ,. (35) Jaber E. Abu Qudeiri, Hidehiko Yamamoto and Mohamed Anouar Jamali, Buffer Size Decision for Balanced and Unbalanced Flexible Transfer Line With Rework Paths, 8th International Conference on Progress of Machining Technology (ICPMT2006), PP.: 77 – 80, Matsue, Shimane, Japan, November 9-11, 2006. (36) Jaber E. Abu Qudeiri, Mohamed Anouar Jamali and HidehikoYamamoto, Buffer Size Decision for the Flexible Transfer Line with Rework Paths Using Genetic Algorithms, International Conference on Service systems and Service Management (ICSSSM06), pp.210 - 215, Troyes - France, Oct. 2006. (37) Jaber E. Abu Qudeiri, Mohamed Anouar Jamali and Hidehiko Yamamoto, Concurrent Production Engineering System for Buffer Size Decision and FTL Layout Design, International Conference on Service systems and Service Management (ICSSSM06), PP.:197 - 202, Troyes – France, Oct. 2006. (38) Jaber E. Abu Qudeiri, Al-Momani Raid, Mohamed Anouar Jamali and Hidehiko Yamamoto, Optimization Hole-Cutting Operations Sequence in CNC Machine Tools Using GA, International Conference on Service systems and Service Management (ICSSSM06), PP.:501 – 506, Troyes – France, Oct. 2006. (39) Momani, A., Abu Qudeiri, J. and Yamamoto, H., Development of New Encoding Method for the Complex Production Systems, International Symposium on Scheduling (ISS2006), Tokyo, Japan, JSME N0. 06-203: 94-99, (40) Yamamoto, H., Abu Qudeiri J. and Marui, E., “Definition of FTL with bypass lines and its simulator for buffer size decision”, International Conference on Industrial Engineering and Systems Management (IESM'05), Marrakech, Morocco, MAY 16 – 19, 2005. (41) HidehikoYamamoto, Jaber Abu Qudeiri and Etsuo Marui. Production Line Design Support system to Decide Buffer size for FTL with Bypass Lines, proceeding of ICAM 2004, PP.: 511-516, Japan, 2004. (42) Yamamoto, H., Marui, E. and Abu Qudeiri, J. “Development of New FTL Simulator for Buffer Size Decision”, IEEE International Symposium on Computational CIRA03”. (C) Books, Book's Chapter and Technical Reports (43) Abu Qudeiri J., Jamali M., Yamamoto H., “Concurrent Production Engineering System by Discrete Simulation and CAD”, Technical Committee on Concurrent Systems Technology Conference (CSS), IEICE Technical Report, Vol. 106, No. 88, CST2006-3, PP.:13-18, June 1, 2006. (44) Hidehiko Yamamoto, Jaber Abu Qudeiri and M. A. Jamali, Book chapter: Real-Time Control of Decentralized Autonomous Flexible Manufacturing Systems by Using Memory and Oblivion. KES (1), Lecture Notes in Computer Science, Vol. 4251, PP.: 252-259, ISBN-978-3-540-46535-5, Springer, 2006. (D) Submitted papers (1) Optimisation of a Sequence for Multi-Cutting Tool Operations in CNC Machines, under review. (2) Neural Network Metamodel to Predict the Springback in the Air Bending Process, Journal of Mechanical Science and Technology, under review. (3) Response Surface Metamodel to Predict Springback in Sheet Metal Bending Process, Journal of Manufacturing Science and Engineering, under review. (D) Papers under preparation (4) Real-Time Production Simulator System to Optimize Flexible Routing in FMS. (5) GA Support System to Optimize a Sequence for Multi-Planes Multi-Cutting Tools Operations in CNC Machines Languages: ♦ Arabic (Native). ♦ English : Very good command of English Language ♦ Japanese : Very good command of Japanese Language Organizations and Affiliates: ♦ Japan Society of Mechanical Engineers (JSME) ♦ Jordan Engineers Association (JEA) ♦ International Institute for Innovation, Industrial Engineering and Entrepreneurship (I4e2) Cultural, and Academic activities ♦ Member of the organizing committee ofthe Seventh Jordanian International Mechanical Engineering Conference (JIMEC’7). Chair of Modeling and Simulation track of the conference, Amman-Jordan, September 2009. ♦ Referee of the Europe Journal of operational research, (2006 - 2007) ♦ Referee of the Int. J. of Product Development, 2007. ♦ A Member of the Scientific Committee of Mechanical Engineering Division, (1994 - 2000). ♦ Member of the organizing committee of the second and third Jordanian International Conference for Mechanical Engineering. ♦ Editor Vice-President of Mechanical Engineering Magazine (Mechanical Review) at Jordan Engineers Association for 3 years 1995 -1997. References 1. Professor Mousa S Mohsen, Professor in Mechanical Engineering Department and Dean of Research and Graduate. The Hashemite University, Zarqa 13115 Jordan TEL: +962 5 390 3333 (WORK), +962 6 5851290 (HOME) Mobile: 962 79 9050 772 E-mail: msmohsen@hu.edu.jo http://staff.hu.edu.jo/mousamohsen 2. Dr. Adnan Huseen, Universiti Teknologi Malaysia (UTM), Mechanical Engineering Department, E-mail: adnan@mail.fkm.utm.my 3. Dr. Ahmed Saleh Head of Mechanical Engineering Department, Philadelphia University, P. O. Box (1) Philadelphia University, Amman 19392 Jordan. Office Tel. (+ 962 -6- 4799000 ) Ext. 2253, Mobile (+ 962 –777080331) E-mail: asaleh@philadelphia.edu.jo Further details are available upon request. "Last Updated on June, 2012"

Attachment: 
AttachmentSize
PDF icon resume_qudeiri_12_2015.pdf466.84 KB