Mohammad Jamal Mahmoud Al-Shannag is a professor of civil engineering at king saud university since 2010, Saudi Arabia; associate professor of civil engineering at Jordan university of science and technology from 1998-2005.  He received his PhD in Civil Engineering from the University of Michigan, Ann Arbor, in 1995.  His research interests include Fiber reinforced cementitious composites and ferrocement; structural repair and retrofit of reinforced concrete structures; normal, high performance and lightweight concretes; pozzolanic cements, durability of concrete, and concrete making materials.

 
Microstructure of cement paste; special cements; concrete-environment interactions; time-dependent effects: Creep and shrinkage; use of marginal and recycled aggregate; polymers and polymer...
Engineering materials (general properties, testing and specifications).  Stress-strain behavior of concrete and reinforcing bars.  Properties and testing of concrete making materials (...
Introduction and fundamentals of mechanics of deformable materials. Concept of stress and strain and Hooke’s law. Concept of failure, yield and allowable stresses. Factor of safety and...
Various combinations of a local natural pozzolan and silica fume were used to produce workable high to very high strength mortars and concretes with a compressive strength in the range of...
Laboratory investigation was undertaken to develop high-performance cement-based grouts for infiltrating fiber-reinforced cementitious composites that makes them ideally suited for...
Six beam-column (B-C) joints were constructed according to the existing practice in Jordan and tested under cyclic lateral loading to determine the effect of using high performance steel...
EDUCATION  1995 Ph.D, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, USA. Thesis Title: Tensile behavior of fiber reinforced DSP cement.  1987 MSc...
ACADEMIC  EXPERIENCE       YEARS                                 POSITION 2010 - present Professor, Department of Civil Engineering. King Saud University, Riyadh, Saudi Arabia. 2005 - 2010...
TEACHING EXPERIENCE Under-graduate: At King Saud University: (2005-present):Taught several courses, supervised and participated in the examination committees of many graduation projects....