تجاوز إلى المحتوى الرئيسي
User Image

Tarek H. Almusallam

Professor

Faculty

كلية الهندسة
Dept. of Civil Engg, King Saud University, Building 3, Office 2A28, , PO Box 800, Riyadh 11421, Saudi Arabia
المنشورات
مقال فى مجلة

Journal Publications

 Papers in ISI Journals
1.   Yousef Al-Salloum, S. Hadi, H. Abbas, Tarek Almusallam, M.A. Moslem (2017), “Bio-induction and bioremediation of cementitious composites using microbial mineral precipitation – A review”, Construction and Building Materials, 154, 857–87.

2.      Hussein M. Elsanadedy, Tarek H. Almusallam, Yousef A. Al-Salloum and Husain Abbas (2017), “Investigation of precast RC beam-column assemblies under column-loss scenario”, Construction and Building Materials, 142, 552–571.

3.      Tarek Almusallam, Yousef Al-Salloum, Tuan Ngo, Priyan Mendis & Husain Abbas, "Experimental Investigation of Progressive Collapse Potential of Ordinary and Special Moment Resisting Reinforced Concrete Frames", Materials and Structures, 50:137, DOI: 10.1617/s11527-017-1014-x

4.      M. S. Morsy, Y.A. Al-Salloum, T.H. Almusallam and H. Abbas (2017), “Mechanical properties, phase composition and microstructure of activated Metakaolin-slaked lime binder”, KSCE J of Civil Eng., 21 (3), pp. 863-871 DOI: 10.1007/s12205-016-0667-2

5.      Hussein Elsanadedy, Tarek Almusallam, Yousef Al-Salloum and Rizwan Iqbal (2017), “Effect of high temperature on structural response of RC circular columns strengthened with FRP composites”, Journal of Composite Materials, Vol. 51(3): 333–355.

6.      Yousef Al-Salloum, H. Abbas, Q.I. Sheikh, S. Hadi, Saleh Alsayed, Tarek Almusallam (2017), “Effect of some biotic factors on microbially-induced calcite precipitation in cement mortar”, Saudi Journal of Biological Sciences, Vol. 24, 286–294.

7.  Aref Abadel, Husain Abbas, Tarek Almusallam, Yousef Al-Salloum, Nadeem Siddiqui, Mohammed A. Shubaili, Hossam El-Din M. Sallam (2016), “Discussion: Mechanical properties of hybrid fibre-reinforced concrete – analytical modelling and experimental behavior”, Magazine of Concrete Research, Paper 1600243, Volume 68 Issue 22, November, 2016, pp. 1183-1186.

8.      Tarek Almusallam, S.M. Ibrahim, Yousef Al-Salloum, Aref Abadel and Husain Abbas (2016), “Analytical and experimental investigations on the fracture behavior of hybrid fiber reinforced concrete”, Cement and Concrete Composites, Vol. 74,  pp. 201-217.

9.      Yousef Al-Salloum, Tarek Almusallam, Hussein Elsanadedy and Rizwan Iqbal (2016), “Effect of elevated temperature environments on RC columns axially strengthened with different techniques”, Construction and building materials, Vol. 115, pp. 345-361.

10.   S.M. Ibrahim, Tarek Almusallam, Yousef Al-Salloum, Aref Abadel and H. Abbas (2016), “Strain rate dependent modeling for compression response of hybrid fiber reinforced concrete”, Latin American Journal of Solids and Structures, Vol. 13, pp. 1695-1715.

11.   H.M. Elsanadedy, H. Abbas, Y.A. Al-Salloum and T.H. Almusallam (2016), “Shear strength prediction of HSC slender beams without web reinforcement”, Materials and Structures, Vol. 49, Issue 9, pp. 3749-3772, DOI 10.1617/s11527-015-0752-x

12.   Aref Abadel, Husain Abbas, Tarek Almusallam, Yousef Al-Salloum, Nadeem Siddiqui (2016), “Mechanical properties of hybrid fibre-reinforced concrete–analytical modelling and experimental behaviour”, Magazine of Concrete Research, 68(16), 823–843, DOI: 10.1680/jmacr.15.00276.

13.   Al-Salloum Y.A., Almusallam T.H., M.Y. Khawaji, Ngo T., Elsanadedy H.M., and Abbas H. (2015), “Progressive collapse analysis of RC Buildings against Internal Blast”, Advances in Structural Engineering,Vol. 18, No. 12, pp. 2181-2192.

14.   Tarek H. Almusallam, Aref A. Abadel, Yousef A. Al-Salloum, Nadeem A. Siddiqui, and Husain Abbas (2015), “Effectiveness of hybrid-fibers in improving the impact resistance of RC slabs”, International Journal of Impact Engineering, Vol. 81, pp. 61-73.

15.   T.H. Almusallam, Y.A. Al-Salloum, S.H. Alsayed, Rizwan A. Iqbal, H. Abbas (2015), “Effect of CFRP strengthening on the response of RC slabs to hard projectile impact”, Nuclear Engineering and Design, Vol. 286, pp. 211–226.

16.   Ayman Mosallam, Hussein M Elsanadedy, Tarek H Almusallam, Yousef A AL-Salloum, Saleh H Alsayed (2015), “Structural evaluation of reinforced concrete beams strengthened with innovative bolted/bonded advanced frp composites sandwich panels”, Composite Structures 124: 421–440.

17.  Tarek H. Almusallam, Hussein Elsanadedy, Yousef A. Al-Salloum (2015), “Effect of Longitudinal Steel Ratio on Behavior of RC Beams Strengthened with FRP Composites - Experimental and FE Study”, Journal of Composites for Construction, Volume 19, Issue 1, 04014028.

18.   Yousef Al-Salloum, Tarek Almusallam, S.M. Ibrahim, H. Abbas and Saleh Alsayed (2015), “Rate dependent behavior and modeling of concrete based on SHPB experiments”, Cement & concrete composites, Vol. 55, 34-44.

19.   Husain Abbas, Aref A. Abadel, Tarek H. Almusallam and Yousef A. Al-Salloum (2015), “Effect of CFRP and TRM strengthening of RC slabs on punching shear strength”, Latin American Journal of Solids and Structures, Vol. 12, pp. 1616-1640.

20.   H.M. Elsanadedy, H. Abbas, Y.A. Al-Salloum and T.H. Almusallam (2015), Closure to “Prediction of Intermediate Crack Debonding Strain of Externally Bonded FRP Laminates in RC Beams and One-Way Slabs,” Journal of Composites for Construction, ASCE, 19(2), 07014004.

21.   Elsanadedy H.M, Almusallam T.H., Alsayed S.H., Al-Salloum Y.A. (2015), “Experimental and FE study on RC one-way slabs upgraded with FRP composites”, KSCE J Civil Eng 19(4):1024-1040.

22.  H.M. Elsanadedy, H. Abbas, Y.A. Al-Salloum and T.H. Almusallam (2014), “Prediction of intermediate crack debonding strain of externally bonded FRP laminates in RC beams and one-way slabs”, Journal of Composites for Construction, Vol. 18(5), 04014008.

23.   Yousef Al-Salloum, Saleh Alsayed, Tarek Almusallam, S.M. Ibrahim and H. Abbas, “Investigations on the influence of radial confinement in the impact response of concrete”, Computers and Concrete, Vol. 14, No. 6 (2014) 675-694.

24.   H.M. Elsanadedy, T.H. Almusallam, Y.R. Alharbi, Y.A. Al-Salloum and H. Abbas (2014), “Progressive collapse potential of a typical steel building due to blast attacks”, J of constructional steel research, Vol. 101, Pages 143–157.

25.   S.H. Alsayed, T.H. Almusallam, S.M. Ibrahim, N.M. Al-Hazmi, Y.A. Al-Salloum and H. Abbas (2014), "Experimental and Numerical investigation for compression response of CFRP strengthened shape modified wall-like RC column", Construction & Building Materials, Vol. 63, pp. 72-80.

25. M. S. Morsy, S. H. Alsayed, Y. Al-Salloum and T. Almusallam (2014), "Effect of sodium silicate to sodium hydroxide ratio on strength and microstructure of fly ash geopolymer binder", Arabian Journal for Science and Engineering, Vol. 39(6), pp. 4333-4339.
26.  Nadeem A. Siddiqui, Baha M. A. Khateeb, Tarek H. Almusallam, Yousef A. Al-Salloum, Rizwan A. Iqbal, and H. Abbas (2014), “Reliability of RC Shielded Steel Plates against the Impact of Sharp Nose Projectiles", Int J of Impact Engineering, Vol. 69, pp. 122-135.
27.  Nadeem A. Siddiqui, Baha M. Khateeb, T.H. Almusallam, H. Abbas (2014), "Reliability of double-wall containment against the impact of hard projectiles, Nuclear Eng & Design 270:143-151.
28.  M S Morsy, Y Al-Salloum, T Almusallam and H Abbas (2014), "Effect of Nano-Metakaolin Addition on the Hydration Characteristics of Fly Ash Blended Cement Mortar", J of Thermal Analysis and calorimetry, Vol. 116, pp. 845-852.
29. S.M. Ibrahim, S.H. Alsayed, H. Abbas, E. Carrera, Y.A. Al-Salloum and T.H. Almusallam (2014), "Free vibration of tapered beams and plates based on unified beam theory", Journal of Vibration and Control, Vol. 20(16), pp. 2450–2463.
30. T.H. Almusallam, N.A. Siddiqui, R.A. Iqbal, H. Abbas (2013), "Response of hybrid-fiber reinforced concrete slabs to hard projectile impact", Int J of Impact Engineering, Vol. 58, pp. 17–30.
31. Elsanadedy H.M, Almusallam T.H., AlsayedS.H., Al-SalloumY.A, “Flexural strengthening of RC beams using textile reinforced mortar - Experimental and numerical study” Composite Structures 2013, Vol. 97, p.p. 40-55.
32. Almusallam T.H., ElsanadedyH.M, Al-SalloumY.A, AlsayedS.H, “Experimental and numerical investigation for the flexural strengthening of RC beams using near-surface mounted steel or GFRP bars” Construction and Building Materials 2013, Vol. 40, pp. 145 - 161.
33. AlmusallamT.H., Al-SalloumY.A, AlsayedS.H, El-Gamal S., and Aqel M. "Tensile properties degradation of glass fiber-reinforced polymer bars embedded in concrete under severe laboratory and field environmental conditions", Journal of Composite Materials 2013, Vol. 47, Issue 4, pp. 393-407.
34. Al-SalloumY.A., El-Gamal S., Almusallam T.H.,AlsayedS.H., and Aqel M., “Effect of Harsh Environmental Conditions on the Tensile Properties of GFRP Bars”, Composites Part B: Engineering 2013, Vol.45, No: 1, pp. 835 - 844.
35. Al-Salloum Y.A., Shah A.A., Abbas H., Alsayed S.H., Almusallam T.H. and Al-Haddad M.S. “Prediction of compressive strength of concrete using neural networks", Computers and Concrete 2012, Vol. 10, Issue 2, pp. 197-217.
36. Alsayed S.H, Al-Salloum Y.A, Almusallam T.H., El-Gamal S., and Aqel M. "Performance of glass fiber reinforced polymer bars under elevated temperatures", Composites Part B: Engineering, 2012, Vol. 43, Issue 5, pp. 2265-2271.
37. Abbas H., AlsayedS.H., Almusallam T.H. and Al-SalloumY.A. "Characterization of hole-diameter in thin metallic plates perforated by spherical projectiles using genetic algorithms", Archive of Applied Mechanics 2011, Vol. 81, Issue 7, pp. 907-924.
38. Elsanadedy H.M., Almusallam T.H., Abbas H., Al-SalloumY.A., AlsayedS.H. "Effect of blast loading on CFRP-Retrofitted RC columns – a numerical study", Latin American Journal of Solids and Structures 2011, Vol. 8, pp. 55-81.
39.  Al-SalloumY.A., Almusallam T.H., AlsayedS.H. and Siddiqui N.A. "Seismic behavior of as-Built, ACI-complying, and CFRP-repaired exterior RC beam-column Joints", Journal of Composites for Construction 2011, Vol. 15, No. 4, pp. 522-534.
40. Almusallam T.H., Elsanadedy H.M., Abbas H., AlsayedS.H. and Al-SalloumY.A. (2010), "Progressive collapse analysis of a RC building subjected to blast loads", Structural Engineering & Mechanics, Vol. 36, Issue 3, pp. 301-319.
41. AlsayedS.H., Almusallam T.H., Al-SalloumY.A., and Siddiqui N.A. (2010), “Seismic rehabilitation of corner RC beam-column joints using CFRP composites.” Journal of Composites for Construction, ASCE, Vol. 14, Issue 6, pp. 681-692.
42. AlsayedS.H., Al-SalloumY.A., Almusallam T.H. and Siddiqui N.A. (2010). "Seismic Response of FRP-upgraded exterior RC beam-column joints.” Journal of Composites for Construction, ASCE, Vol. 14, Issue 2, pp. 195-208.
43. Y.A. Al-Salloum and T.H. Almusallam, "Seismic Response of Interior RC Beam-Column Joints Upgraded with FRP Sheets – Part I:  Experimental Study,"ASCE Journal of Composites for Construction, Volume 11, Issue 6, November/December 2007, pp. 575-589.
44. T.H. Almusallam, Y,A, Al-Salloum, "Seismic Response of Interior RC Beam-Column Joints Upgraded – Part II:  Analysis and Parametric Study",ASCE Journal of Composites for Construction, Volume 11, Issue 6, November/December 2007, pp. 590-600.
45. T.H. Almusallam, Y,A, Al-Salloum, "Behavior of FRP Strengthened Infill Walls Under In-Plane Seismic Loading",  ASCE Journal of Composites for Construction 11(3):308-318 (May/June 2007).
46. Y.A. Al-Salloum and T.H. Almusallam, "Creep Effect on the Behavior of Concrete Beams Reinforced with GFRP Bars Subjected to Different Environments", Construction and Building Materials, Volume 21, Issue 7, July 2007, Pages 1510-1519.
47. T.H. Almusallam, "Behavior of Normal and High-Strength Concrete Cylinders Confined with E-glass/Epoxy Composite Laminates,” Composites Part B Eng 38(5-6):629-636, July-September 2007.
48. Tarek H. Almusallam , “ Load –Deflection Behavior of RC Beams Strengthened With GFRP Sheets Subjected to Different Environmental Conditions ”, Cement and Concrete Composites, Vol. 28, No. 10, November 2006, pp. 879-889. 
49. Tarek H. Almusallam and Yousef A. Al-Salloum, “Durability of GFRP Rebars in Concrete Beams under Sustained Loads at Severe Environments,” Journal of Composite Materials 40:623-637, 2006.
50. Al-Salloum, Y.A. and Almusallam, T.H.Load Capacity of Concrete Masonry Block Walls Strengthened with Epoxy-bonded GFRP Sheets Journal of Composite Materials 39:1719-1745, 2005.
51. T.H. Almusallam and Y.A. Al-Salloum, “Flexure Strengthening of RC Beams Using Glass FRP Sheets”, Pertanika Journal of Science and Technology, University Putra Malaysia, 13(1), Jan. 2005.
52. T.H. Almusallam and Y.A. Al-Salloum, “Ultimate Strength Prediction for RC Beams Externally Strengthened by Composite Materials,” Journal of Composites: Part B Engineering 32: 609-619, 2001.
53. S.H. Alsayed, Y.A. Al-Salloum, T.H. Almusallam, “Performance of Glass Fiber Reinforced Plastic Bars As A Reinforcing Material for Concrete Structures,” Journal of Composites: Part B Engineering, Vol. 31, 2000, pp. 555-567.
54.  S.H. Alsayed, Y.A. Al-Salloum, T.H. Almusallam, “Fibre-Reinforced Polymer Repair Materials – Some Facts,” Journal of the Institution of Civil Engineering, 138(3): 131-134, 2000.
55. Almusallam, T.H., "Analytical Prediction of Flexural Behavior of Concrete Beams Reinforced by FRP Bars," Journal of Composite Materials, Vol. 31, No. 7, pp 640-657, 1997.
56. Almusallam, T.H. and Alsayed, S.H., "Stress-Strain Relationship of Normal, High Strength and Light Weight Concrete," Magazine of Concrete Research, Vol. 47, No. 170, pp. 39-44, March 1995.
57. Al-Salloum, Y.A. and Almusallam, T.H., "Optimality and Safety of Rigidly and Flexibly Jointed Steel Frames," Journal of Constructional Steel Research, Vol. 35, pp. 189-215, 1995.
58. Almusallam, T.H. and Al-Sugair, F.H., "First-order Computation of the Statistics of Joint Moments in Partially Restrained Steel Structures," Computers and Structures, Vol. 52, No. 4, pp. 605-610, 1994
59. Almusallam, T.H. and Richard, R.M., "Steel Frames Analysis with Flexible Joints Exhibiting a Strain Softening Behavior," Computer and Structures, Vol. 46, pp. 55-65, 1993. 
 
 Papers in Non-ISI Journals

1. Y.A. Al-Salloum, H. Abbas, T.H. Almusallam, T. Ngo, P. Mendis (2017), “Progressive Collapse Analysis of a Typical RC High-Rise Tower”, Journal of King Saud University - Engineering Sciences, Volume 29, Issue 4, October 2017, Pages 313-320.

2. Aref Abadel, Husain Abbas, Tarek Almusallam, Yousef Al-Salloum, Nadeem Siddiqui (2017). “Local impact damage response of CFRP-strengthened RC slabs”, Procedia Engineering 173: 85–92 (11th International Symposium on Impact and Plasticity, Implast 2016).

3. Husain Abbas, Tarek Almusallam, Yousef Al-Salloum, Nadeem Siddiqui (2017). “Prediction of ejected mass from hybrid-fiber reinforced concrete slabs subjected to impact loads”, Procedia Engineering 173: 77–84 (11th International Symposium on Impact and Plasticity, Implast 2016).

4. Husain Abbas, Tarek Almusallam and Yousef Al-Salloum, “Improving the Impact Resistance of Reinforced Concrete”, Advanced Materials Research, Vols. 919-921 (2014), pp. 1924-1929.

5. Khan M.I., Almusallam T.H., AlmosaA.A., AlsayedS.H., Al-SalloumY.A. "Evaluation and performance of repair materials for rehabilitation of concrete structures", Advanced Materials Research, January 2011, Vols. 163-167, pp. 3820-3825.
6. Alsayed S.H., Almusallam T.H., Al-SalloumY.A., El-Gamal S. "Tensile properties of GFRP bars after exposure to harsh laboratory and field environmental conditions", Advanced Materials Research, May 2011, Vols. 250-253, pp. 3738-3742.
7. Almusallam T.H., Elsanadedy H.M., Abbas H., Ngo T. and Mendis P. (2010), "Numerical Analysis for Progressive Collapse Potential of a Typical Framed Concrete Building", International Journal of Civil and Environmental Engineering, Vol. 10, No. 2, pp. 40-46.
8.  T.H. Almusallam, “Experimental Evaluation of Drying Shrinkage and Mechanical Properties of Repair Materials for Concrete Structure”, Journal of King Saud University, Vol. 19, Eng. Sci. (2), 2006. 
9. Y.A. Al-Salloum and T.H. Almusallam, “Rehabilitation of the Infrastructure Using Composite Materials: Overview and Applications”, Journal of King Saud University, Vol. 16, Eng. Sci. (1), 2003, pp. 1-21.
10. T.H. Almusallam, "Strengthening of Unreinforced Masonry Walls with IRP Composite Laminates", Scientific Bulletin, Faculty of Engineering, Ain Shams University, Vol. 36, No. 4, Dec. 31, 2001, pp. 79-94.
11. Alsayed, S.H, AL-Salloum, Y. A., and Almusallam, T.H, “Concrete Columns Reinforced by Glass Fiber Reinforced Polymer Rods” ACI SP-188, Nov. 2000, pp.103-112.
12.  Alsayed, S.H. and Almusallam, T.H., "A Numerical Model for Predicting the Behavior of Rehabilitated and/or Strengthened RC Beams," Journal of King Saud University, Vol. 8, Eng. Sci.(2), p. 217-233, 1996.

 

مزيد من المنشورات
publications
  1. S.H. Alsayed, T.H. Almusallam, Y.A. Al-Salloum and M.A. Amjad, Glass Fiber Reinforced Plastic Bars: Properties and Applications for Concrete Structures, 1st Progress Report-Research Project…
publications
  1. “A study of kaolin-based geopolymer concrete mix for producing masonry blocks”, Ebrahim Moharrm, MS thesis, 2018.
  2. “Rehabilitation of Beam-Column Connections in Existing Precast…