Natural convection in a horizontal cylindrical annulus using porous fins

Journal Article

• Magazine \ Newspaper: International Journal for Numerical Methods in Heat and Fluid Flow
• Issue Number: 5
• Volume Number: 18
• Pages: 618-634

Publication Abstract

Purpose – The aim is to study the effects of fin conductivity ratio, Darcy number, and Rayleigh number on the average Nusselt number for fins made of porous material when attached to the inner cylinder of the annulus between two concentric cylinders. The paper also aims to compare the results with those obtained using solid fins over a range of Rayleigh numbers.
Design/methodology/approach – The Darcy-Brinkman equations were used to model the fluid flow inside the porous media and the Boussinesq approximation was used to model the buoyancy effect. The energy equation is also solved to find the temperature distribution in the domain of interest. The model equations are solved numerically using a finite volume code.
Findings – Porous fins provided higher heat transfer rates than solid fins for similar configurations. This enhancement in heat transfer reached 75 per cent at Ra ¼ 5 £ 104 and Da ¼ 2.5 £ 1022. It is also found that unlike solid fins the rate of heat transfer from the cylinder equipped with porous fins decreases with increasing the fin inclination angle.
Research limitations/implications – The range of the Rayleigh number considered in this
research covers only the laminar regime. The research does not cover turbulent flows. In addition to that, the local thermal equilibrium assumption is used.